90 deg 3port w/iso

Product Information
Bracket and valve combo saves over buying them separately. Free shipping. Made in the USA. 3 port MAC valve with ONE mounting bracket and vibration isolator. Note the 2nd bracket in the picture is just so you can see it better. You will need to obtain one more countersunk M6x1 screw to mount the rear of the isolator to whatever you are going to mount it to. We can't stock every unknown screw length that each installation may require. These are easily available at ACE hardware etc. Bracket Features: (This is THE best MAC 3 port bracket we know of.) TWO mounting possibilities, back mount or bottom mount. Low space design. Only one 6mm (~1/4") hole needed to mount to your car. "L " shape supports valve on both sides taking the load away from the smallish MAC mounting screws. Lightweight Aluminum ,3/16" thickness.Anodized matte grey. 2x stainless steel #5 MAC mounting screws included. 1x stainless steel M6 countersunk screw included to mount the bracket to the vibration isolator. 1x high temp (175 F),vibration isolator included. Has two female M6x1mm tapped holes. Fully corrosion proof. Will not fatigue like other "Tab" designs.Neither the bracket or the small MAC screws will fatigue or come loose if installed correctly. Mounting hole is aligned with mass center, for best durability,minimizes rotational forces. The ultimate installer will also apply a dab of silicone etc between valve and bracket as a "bed" to maximize surface contact with the bracket. Optional but what we do on rally cars etc. Why pay more than you have to? This is the same valve that other ECU/EMS manufacturers put their own label on. No risk for the buyer , if it isn't compatible with your controller just return it. Feel free to ask us first. Genuine MAC brand industrial valve with the MAC label , compatible with Autronic,GEMS,Neptune,Hondata,Halltech,Megasquirt,Microsquirt,Subaru,Mitsubishi,Vipec,LINK and most others. (ebay allows listing what brands this is compatible with here,in this description (not the title) ,it is not their brand it is MAC brand, others may and do relabel this valve) There is a good reason these valves are used by most aftermarket engine management systems, they are very stable (because of port design and VERY reliable. They are industrial quality. We know of no Ecu's that these are not compatible with except for some stepper motor type drivers (rare). On the very unlikely chance that it doesn't work with your controller, we will accept returns if you have a problem AND keep the item in 100% perfect cosmetic shape (so don't mount it permanently). That said, we have had no returns . Instructions and tuning tips available. see here also : http://circuitse7en.net/page26.php Specifications: Brand: MAC Part number: 35A-AAA-DDBA-1BA Type: 3 port solenoid , this is the most common method to control Boost. 4 Port also available. 12 volts 5.4 watts ,25.4 ohm coil (measured), .45 Amps@12 volts Full vacuum to 120 psi capable. 10-40 hz (ECU determines the frequency). included: sintered air vent/muffler AND 2 x 3/16" 90 degree hose barbs (the sintered mufflers are hard to find that is why we included them) SIntered vent avoids having to run another line to you air filter. Value Added: FREE domestic USA shipping. Excellent after sale support (instructions and tips) (Mechanical engineers,tuner.fabricators,racers work here) FAST shipping We are a very reliable seller and sell many of these internationally BEST price available. Contact us for large quantities or special arrangements : robertoATcircuitse7enDOTnet (anti spam spelling)

Price: $55.00

• Tell a Friend